Dirty Work

We have to finish backfilling around the addition's foundation. This task was mostly completed about two months ago, and now we're covering up the last few inches. We're also in the process of preparing the yard for the winter weather that is fast approaching. This means that we have to modify the slope of the ground so that water will drain away from the house, rather than toward the foundation.

Here we are having fun digging nasty, sticky mud:

This photo shows our progress along one side of the addition. (In case you can't tell, the backfilling is complete along the right side of the photo.)

The Roof, The Roof, The Roof Is On, But Not On Fire

That would be really bad.

Update on the Roof and Other Stuff

For days, our computer would do nothing but display the blue screen of death, which is why I have not posted anything to the blog in a couple weeks. Mike was able to spend a little time getting it to work, which is not exactly what he needed to be doing while trying to put a roof on the addition.

As I write this post, Mike is up on the roof, hammering away. We are very close to having shingles covering the new surface and will be relieved once this major step is complete. Next we'll move on to the windows, and after that we might be able to breathe a little more easily.

Here's what's happened since my last post went up:

1) The roof over the back windows was built. No shingles yet, but the structure is there.

2) The new bump out, which will house the butler pantry, was constructed.

3) As I already stated, the roofing materials have mostly been hammered on.

Our new furry friend is still living with us. It looks as though Ashby has become a permanent resident. He's a bit of a troublemaker, but what can you expect from an energetic kitten? The adult cats seem to have accepted his presence, although without much enthusiasm. I truly don't blame them.

Ashby thinks he's a pro wrestler. He constantly sneaks up on Brown One, Gray One, and Charcoal and throws his front arms around their necks and takes them down. I'm surprised that they allow this given that they're so much bigger than he is. I don't doubt they'd like to teach him a lesson, but for some reason they hold back. But at least they do have their moments where they get along.

A Closer Look at the Roof (and a New Friend)

Since our last entry, we've made more progress on the roof. We finished putting the rafters up and have added about half the sheathing.

Here are some videos that explain our work in greater detail.

And here's the new friend we reference in the title of this entry.

The Start of the Roof

Below are some pictures of the roof in progress, for all those eager to see the latest.

Bump Out Be Gone!

We were supposed to build the roof of the addition today, but Mike found a slight flaw in the design. Our architect suggested he consult with an engineer, which resulted in a construction delay.

To make good use of our time, we worked on demolishing the bump out in our dining room and cleaning up a pile of construction debris. We also tore up the floor in the dining room, which will no longer be the dining room. The space will become part of the kitchen/great room, and the current living room will become the dining room.

The Ridge Beam

On Thursday, Steve, Mike, and I worked on the ridge beam, which consists of two long, flat boards that have been nailed together.

I hammered in most of the nails holding the boards together while Mike and Steve sawed them down to just the right size.

Once assembled, it was time to hoist the beam into place, which was easier said than done. Mike and Steve crafted a sort of totem pole. While one end of the beam was resting on the roof, the other sat on the floor of the addition. We placed the top of the totem pole under the beam, then slid the pole along the length of the beam to raise it up.

Now, this sounds very easy, but I have to say this was one of the most frightening things I have ever done in my life. For much of the time, I was holding the totem pole, by myself or with Steve, while the beam wobbled several feet above our heads. Moving the totem was tough work, and Steve and Mike quickly realized they needed to widen its base. After a quite a struggle, the beam finally reached its fnal destination!

Once the ridge beam was in place, the guys still needed to work on it, so for easy access, they built this handy stand.